[Full Version] V1.0.6.0 CG FC200 ECU Programmer with Solder Free Adapters Set 6HP & 8HP MSV90 N55 N20 B48 B58

[Full Version] V1.0.6.0 CG FC200 ECU Programmer with Solder Free Adapters Set 6HP & 8HP MSV90 N55 N20 B48 B58

$689.00

Looking for help? or Get More Discount
Please contact Whatsapp: WhatsApp:+13399708796

Brand: Launch Creader
Product Code: SK370+SK360
Availability: In Stock
Weight: 1.20

Qty

Description
Reviews (0)

[Full Version] CG FC200 ECU Programmer with Solder Free Adapters Set 6HP & 8HP MSV90 N55 N20 B48 B58

Buy more save more! This pakage is full version with cg fc200 plus solder adapters!!!

Package Including:
1 set x CG FC200 ECU Programmer
1 set x Solder Free Adapters Set 6HP & 8HP MSV90 N55 N20 B48 B58

Product Introduction:

FC200 ECU programmer is designed for ECU/EGS clone, and it supports 4200 kinds of ECUS/EGS, 3 types of operation modes, involving 80% of the models on the market. FC200 unit has data loss prevention, automatic verification, 100% accurate analysis of BMW's ISN code, support for VIN code modification and data cloning of various models.

What's more, it has 3 exclusive support for DTC shielding and function shutdown. With the exquisite design, FC200 is your trusted auto repair assistant in various operating environments.

Product Functions:

1. Original Parts Protection

FC200 supports OBD and platform mode for more than 98% of ECU/EGS. There is no need to open shell and no punch. FC200 protects original parts of the vehicle.

2. Smart Identification

The "identification" function can help users diagnose whether the ECU module is communicating and check whether the wiring is wrong.

If the ECU module is not damaged and can be communicated, and if the wiring is correct and identification is successful, FC200 can read chip and firmware information.

3. Module Clone

FC200 supports ECU/EGS reading&writing and modules clone, synchronization matching, without online programming, flash data by area, automatic check, chips and modules protection.

4. ISN Reading and Writing

FC200 supports all BMW series (including Mini) ECU ISN code acquisition , convenient for all keys lost matching and anti-theft fault maintenance.

5. VIN Writing

FC200 solves the problem of double VIN or VIN mismatch of vehicles, which is convenient for vehicle maintenance.

6. Data Processing

FC200 supports data analysis and modification for the 4th and 5th generations of Audi/Seat/Skoda/Volkswagen ECUs.

Turn off anti-theft system for Bosch MED/EDC17 series ECU

TPROT off function of Bosch VAG MEDC17 series, BMW/Mini MEVD17/EDC17 series, Hyundai/Kia EDC17/MED(G)17 series.

7. DTC Shielding
The engine DTC code can be shielded, such as the shielding of the 28A0/101F01 fault code of the BMW N55 engine, read the engine data via FC200, then load the data into the hexadecimal data modification tool, modify and save the bytes of the fault code comparison, and then use FC200 to load the modified data and write it back to ECU.

Product Features:

1. Auto ECU Programmer for repair necessary--Support BMW ECU Data reading, writing and clone.

Effectively solve the problem of replacing the second-hand computer after the damage of BMW ECU control unit, just need to read the original computer data and then clone it.

Support almost all the BMW ECU model for reading and writing: MSV90/ MSD85 MSD87 N20 N55 B48 B58 etc.

Successfully make up the market for BMW ECU reading and writing equipment, save you high equipment costs.

2. Auto Locksmith necessary-Support BMW IMMO functions, Read BMW ISN Code by OBD.

Quickly solve the problem for data collection of bmw all key lost.

With more stable and efficient irremovable functions.

If you want to do all key lost for BMW 3 Series 5 Series 7 Series X5 X6 GT535 Six-cylinder engine, must need ISN code to program the keys.

3. Work together with CGDI BMW, VVDI2 Full, Mini ACDP, AUTEL IM508, IM608 Pro, etc to program keys, save your money

(The cost of similar equipment is very expensive).

4. With stable and effective functions by professional quality test. It is easy to operate and quick to start.

5. Add Mercedes-Benz 271 Audi Volkswagen 06J and other ecu types (Some are paid service).

6. Full Version with All License Activated. Free Update Online for One Year. Annual fee needs to be checked with us after the first year. If you don't pay the annual fee, you can still use it, but some bosch ecu does not have the verification function (the function that needs to be connected to the server cannot be used)

7. Multi-Language: English, French, Spanish, Polish, Traditional Chinese and Simplified Chinese

8. With new update, FC200 not only support BMW ECU but also support over three thousands of ECUs like KTAG, Kess, kessy, Dimsport etc.

9. Bosch ECU serach : Free to find out what ECU type (except bosch made in China)

10. With CAN-bus ,and no disassembly (platform mode), and boot mode

FC200 Update Information:

FC200 V1.0.4.0 update information

1. Added search function by car brand in the main interface

2. Added BOSCH engine computer boot mode

ME17.0.3 ME17.1.1 ME17.1.6 ME17.2.4 ME17.3.0 ME17.7

ME17.8.31 ME17.9.20 ME17.9.21 ME17.9.21.1 ME17.9.74

ME17.9.51 ME17.9.52 MED17.1.10 MED17.8.10 MED17.9.3

MEV17.4 MEV17.2.1 MEDG17.0 EDC17CP05 EDC17CP09

EDC17CP10 EDC17CP18

3. Added BOSCH engine computer platform model MG1CS016

4. Added BOSCH Engine computer (BETA)

MD1CP001 MD1CP002 MD1CP006

MD1CP014 MD1CS001 MD1CS003

MG1CS008 MG1CS011 MG1CS018

MG1CS028 G1CS111

5. Added and modified VIN model ME17.1.6

FC200 V1.0.3.0 (2021.12.23) NEW

1.New online store button: query the validity period of the equipment service

2.Added FC200 support list

3.Added Bosch engine platform modes: MEG17.0, MEG17.9.2, MEG17.9.8, MEG17.9.12, MEG17.9.13, MEG17.9.21

4.Added Bosch engine boot mode: MEG17.9.8, MEG17.9.12, MEG17.9.13

5.Added Bosch engine (test version): MD1CP004, MG1CS001, MG1CS002, MD1CS004, MD1CS005, MD1CS006

6.Optimize data processing-close the anti-theft system function (add a second closing method)

7.Optimize the engine menu and wiring diagram

8.Increase the zoom in and zoom out buttons in the wiring diagram interface

9.Optimize the clone function of Volkswagen DL382 gearbox

10.Fix some bugs and optimize software performance

Note: The equipment produced before 2021.09.10 will be automatically activated, and the service time will be valid until 2022.09.10. For equipment produced after this time, after the software is updated, a pop-up window will prompt to activate. Only after activation, some functions related to the server can be used normally. The validity period starts from the day of activation, and the validity period is one year.

FC200 V1.0.2.1 (2021.11.15)

1. Optimize the wiring diagram of BOOT mode of Bosch engine

2. Relaunch Bosch ME17.9.11 engine

3. Upgrade log for handling Spanish errors

4. Fix some bugs and optimize software performance

FC200 V1.0.2.0 (2021.11.02)

1. New ECU (Audi /Seat /Volkswagen /Skoda /Benz /Aston Martin /Aston /Maserati /Hyundai /Kia /Piaggio /Suzuki /Dacia /Renault /Smart /Ford /Opel / Saab /Vauxhall /Citroen /Jaguar /Land Rover /Peugeot) Read and write VIN: MED17.1.21, MED17.1.27, MED17.1.10, EDC17C66, MED17.7.7, MED17.7.5, MED17.3.4, EDC17C08, EDC17C57, ME17 .9.61, ME17.9.20, MED17.0.1, EDC17C19, EDC17CP42, MED17.4.2, MED17.9.9, MEDC17.9

2. New Bosch engine platform mode: MG1CS042

3. Optimize the password reading method of the boot mode of the doctor series engine

4. Optimize the operation interface of PFLASH calibration function

5. Fix some bugs and optimize software performance

FC200 V1.0.1.0 (2021.09.11):

1. Added SH725XX gearbox computer clone: read and write MAPS, read and write EEPROM, backup data, and restore data.

(1) Support all ZF_8HP gearbox computer clones: Alfa Romeo /Alpina /Aston Martin /Audi /Bentley /BMW /Chrysler /Dodge /

Great Wall /Iveco /Jaguar /Jeep /Lamborghini /Land Rover /Mann /Maserati /Porsche /Rolls-Royce /VinFast /Volkswagen

(2) Support VW/Audi/Skoda/Seat DQ380/DQ381 gearbox computer clone

(3) Support Benz/Nissan 9GTronic (VGS-NAG3) gearbox computer clone

(4) Support MINI/Renault/BMW 7-speed dual-clutch (Getarg 7DCT) gearbox computer clone

2. Added BMW gearbox clone model:

DKG(TC1766): Read and write DFLASH, EXT DFLASH, PFLASH

3. Added ECU (Chevrolet, Opel, Vauxhall) to read and write VIN: EDC17C59

4. New sub-function of BMW 6HP: Erase reset function

5. Added Bosch engine boot mode: MEVD17.2.7

6. Added Delphi engine boot mode: CRD2.x TC1797, CRD3.x TC1797

7. Optimize the engine computer read and write speed

8. Fix some bugs and optimize software performance

FC200 Software Features :

1. Interactive Interface

The level is clear, the function is clear, and the "brand-model-ECU" structure is used to help users save time and accurately find the operating directory.

2.Built-in Model Search

Support ECU model and Bosch number search, avoid the trouble of level selection, and enter the function interface as quickly as possible.

ECU Search: Take the BMW MSV90 engine computer as an example. First select "BMW", select "ECU" as the search condition, enter "MSV90", click the search button, and the ECU type will appear.

Bosch Number Search: Take the Volkswagen engine computer as an example. First select "Volkswagen", select "Bosch Number" as the search condition, and enter "0261S10525".

Please note that the Bosch number is a ten-digit number and the letters are capitalized. Click the search button, and the ECU type will appear.

3. Intuitive Wiring Diagram

Highly paid professional designers are hired to produce, 1:1 simulation, bright colors, to avoid user wiring errors.

FC200 Hardware Features:

FC200 Main Unit

1. Integrated injection of polymer materials, professional customized internal circuit boards, national patent certification

2. Exquisite design, easy to carry, can shield surrounding interference signals, adapt to various operating environments

3. There are 3 expansion ports for peripherals, which are automatically diagnosed and identified. They are 12V power port, USB port and DB15 port.The DB15 port can be connected to a free-dismantling adapter and OBD cable.

FC200 Adapters

1.Vehicle-grade wiring harness, made of synthetic metal, has excellent internal conductivity, and can be used continously for 10,0000 times.

2. Tight design, seemless connection between ECU and host to ensure continuours communication and excort your operation

3. Equipped with B-type, C-type, D-type, F-type and G-Type pin interfaces, suitable for many types of ECU and EGS

OBD2 Cable

FC200 obd2 cable mainly suitable for BMW B48/B58 ECU at present, read ISN via OBD without disassembly.

110cm, made of synthetic material, resistant to high temperature water-proof, anti-corrosion is designed according to OBD port of the vehicles, built-in anti-falling buckle make connection stable

FC200 ECU Programmer Wiring Diagram:

For Volkswagen ME17.5.22-TC1724:

For BMW N20 MEVD17.2.9-TC1797:

Supported Vehicle Models

Support 4200 kinds of ECUs, involving 80% of the models on the market.

European Cars: Abbas, Alfa Romeo, Aebi, Artec, Aston, Aston Martin, Audi, Bentley, BMW, Bugatti, Citroen, Dacia, CASE, CASE Tractors, Dallara, Deutz, DS, Ducati, Fendt, Ferrari, Fiat, Jaguar, KTM, Lada, Lamborghini, Lancia, Land Rover, MAN, Maserati, McLaren, Mercedes-Benz, MG, Mini, Opel, Peugeot, Piaggio, Porsche, Renault, Royal Enfield, Saab, SEAT, Skoda, Smart, Steyr, UAZ, Vauxhall, Volkswagen (VW), Volvo, Volvo Penta.

American Cars: Can-Am, Caterpillar, Chevrolet, Chrysler, Dodge, Ford, Ford Trucks, Freightliner, GMC, Indian, Internation, Jeep, Lincoln, New Holland, Polaris, Hidu.

Asian Cars: Force, Genesis Motors, Honda, Hyundai, Infiniti, Isuzu, Kassan, Kia, Kubota, Mahindra, Mitsubishi Fuso, Nissan, Subaru, Suzuki, Toyota.

Chinese Cars: Changan, Chery, Foday, Geely, Great Wall, Iveco, Jianghuai, Jiangling, Lifan, Ferguson, Valtra

Mobile Menu

[Full Version] V1.0.6.0 CG FC200 ECU Programmer with Solder Free Adapters Set 6HP & 8HP MSV90 N55 N20 B48 B58

Write a review

[Full Version] V1.0.6.0 CG FC200 ECU Programmer with Solder Free Adapters Set 6HP & 8HP MSV90 N55 N20 B48 B58

Write a review

whatsapp: +1 339-970-8796