[2022 Full Chip Version] Tactrix Openport 2.0+ECUFLASH ECU Flash Cable J2534 for Toyota Ford Mazda JLR Subaru Mitsubishi Supports WIN10

Highlights:

• New full chip new module plan, fast high speed transfer and very stable function.
• New PCB with inductance to increase voltage, suitable for tuning car under different voltages.
• Field upgradeable software
• J2534 PassThru supports Windows DLL
• Tactrix Openport 2.0 was excellently tested with Toyota, Ford, Mazda, Land rover, and Jaguar software
• OpenPort 2.0 EcuFlash software is capable of reflashing a large number of newer Subaru and Mitsubishi vehicles
• The Openport J2534 is also compatible with Mercedes Xentry Passthry, VW Audi Skoda, Ford, Mazda software.
  (We don't provide software and after-sale service support if you use other third-party software)

• RGB status LEDs
• 72Mhz 32-bit processor
• USB 2.0 full-speed device (USB-A/Mini cable included)
• Standalone data logs to microSD / microSDHC card without a laptop
• Able to apply GND or 5V-25V to OBD pins 1,3,9,11,12,13 or AUX 2.5mm stereo connector
• Able to log from Innovate Motorsports 2.5mm stereo MTS data bus

• There is a New version of 1444870_win software on the official website, don't install this new software with this Openport, otherwise will damage the unit!
• The latest version of the USB driver can not be used! Please Only Use our CD's USB driver! Otherwise the product will be damaged!
• A computer with Intel processor is strongly recommended. Better not use PC with AMD processors.
• CD will maybe easily broken in shipping way,so if CD can't readable,please DO CONTACT us to send you download link
• Computer System Requirement: Windows XP/Win 7 32bits---CD Software request
• DO Not connect the Internet when you use it otherwise device will cause device damage.
• Close anti-virus programmer when run software.

• CAN 2.0
• CAN/ISO15765 and K-line
• KWP2000/dual K-line

For ECU flash you can get info from this list:
 

US Domestic Market Vehicles currently supported by EcuFlash
Make	Model	Year(s)	Compatible OpenPort Interfaces	Init Connector Needed?
Subaru	Impreza WRX	2001-2002	1.2 1.3S 1.3U 2.0	2001-2002
		2003-2005	1.2 1.3S 1.3U 2.0	2003-2005
		2006-2007	1.2 1.3S 1.3M 2.0
		2008-2009	2.0
	Impreza STi	2004-2007	1.2 1.3S 1.3M 1.3U 2.0
		2008-2009	2.0
	Impreza 2.5RS	2005	1.2 1.3S 1.3M 1.3U 2.0
	Impreza 2.5i	2005-2006	1.2 1.3S 1.3M 1.3U 2.0
		2007-2009	2.0
	Forester 2.5	2005-2006	1.2 1.3S 1.3M 1.3U 2.0
		2007-2009	2.0
	Forester XT	2004-2006	1.2 1.3S 1.3M 1.3U 2.0
		2007-2009	2.0
	Tribeca	2006	1.2 1.3S 1.3M 1.3U 2.0
		2007-2009	2.0
	Legacy / Outback 2.5i / 3.0r	2005-2006	1.2 1.3S 1.3M 1.3U 2.0
		2007-2009	2.0
	Legacy GT / Outback XT	2004-2006	1.2 1.3S 1.3M 1.3U 2.0
		2007-2009	2.0
	Baja	2004-2006	1.2 1.3S 1.3M 1.3U 2.0
Mitsubishi	Evo 5		1.3M 1.3U 2.0	Mitsu (for 2.0 only)
	Evo 6		1.3M 1.3U 2.0	Mitsu (for 2.0 only)
	Evo 7		1.3M 1.3U 2.0	Mitsu (for 2.0 only)
	Evo 8		1.3M 1.3U 2.0	Mitsu (for 2.0 only)
	Evo 9		1.3M 1.3U 2.0	Mitsu (for 2.0 only)
	Evo 10		2.0
	(all 2nd Gen)	1996-????	1.3M 1.3U 2.0	Mitsu (for 2.0 only)
	Eclipse GS/GT	2001-2003	1.3M 1.3U 2.0	Mitsu (for 2.0 only)
	Lancer OZ	2002-2004	1.3M 1.3U 2.0	Mitsu (for 2.0 only)

Openport 2.0 Software List:

Openport 2.0+ECUFLASH
TIS Techstream V9.30.002
TIS 8.30.023 Activation
TIS Techstream V8.20.019
TIS Techstream V8.30.023（We also provide the latest version of Tis Techstream）
*VDF_L_DVD158_V5
*JLR158 License SW
SDD_DVD158.02
SPA_DVD158_V2
VDF_J_DVD158_V5
*SDD_DVD158_FULL




Package includes: